Maximising safety by minimising risk
Many businesses across a wide range of industry sectors use or produce gases as part of their working practices and it is essential that any potential leaks are identified swiftly and accurately to prevent undetected escape of gases.
Gas leakages can be potentially harmful to the environment, personnel and the workplace, and an effective Gas Detection System is required to minimise risks while undertaking operational processes and provide the earliest possible warning signs to a leak.
As the East Anglian arm of the Diamond Controls Group, Diamond Services is highly experienced in delivering effective solutions for all forms of gas and liquid leak detection. We are committed to health and safety and our CompEx qualified engineers are proficient in working in hazardous environments.
Our range includes portable gas detection equipment and fixed location gas leak detection systems and sensors. We can also supply and install fully addressable multi-channel systems covering multiple gases. Our broad range of sensors cover many applications and our experience in this specialist field means we are able to offer a complete solution to our customers, including servicing and calibration.
Here are just some of the areas for which we offer protection solutions:
>Boiler Rooms >Laboratories / Clean Rooms
>Commercial Kitchens >Car Parks >Battery Stores
>Battery Charging Rooms >Food Processing >Agricultural Buildings
>Hotels >Offices >Brewing >Residential >Water Treatment
>Chemical Processing >Swimming Pools >Hospitals
Gas Detection Products
View some of our more commonly installed gas detection products. For further information please contact us.
Medem SafeAir CM Gas Detector PanelA gas detection panel for ventilation interlocking and gas pressure proving in a commercial kitchen. It is designed for use within commercial kitchens, to aid sites in meeting BS6173:2009 and IGEM/UP19. It can also monitor for air quality when accompanied by a carbon dioxide monitor.
Medem AGDS-V Gas Detection SystemA four channel gas detection system designed for use in boiler houses, plant rooms and areas with a risk of gas escape or build up. A high alarm from a sensor will isolate any connected solenoid valve. Remote emergency stop buttons and thermal links can be monitored and a fire alarm input will close the gas valve when activated. Relays can be used to activate a beacon/sounder, a fan or signal to a BMS system.
GfG GMA 200-MW Gas Controller Panel and CC22 TransmitterIntegrated audible and LED alarm system for combustible, O2 and toxic gas monitoring and alerts. Programmable relays with up to 16 transmitters per controller. CC22 transmitter measures combustible gases using the proven heat tone principle. High performance electronics and long service life sensors for highly reliable performance with temperature compensation.
Medem AD-MED-M Methane Gas DetectorInstalled at a high level as methane gas is lighter than air and set to pre-alarm rate of 5% LEL and high alarm of 10% LEL.
Medem AD-SAF-CO2 Carbon Dioxide DetectorUsed to monitor the air quality within an area to ensure adequate ventilation. Alarm levels are dependent on application and set within control panels.
Aquilar AquiTron Gas Alert ATG Alert AlarmRefrigerant gas leak detector for occupied spaces. To ensure occupant safety and help protect the Environment. Installation can aid BREEAM credits Pol 01 and Pol 02 , EN378 and F-Gas.
“Diamond Services are one of the contractors we use at Dragonfly Lettings for EICRs on rented properties. I’ve had nothing but good experiences with them- they are efficient, reasonably priced and extremely polite and professional. Would thoroughly recommend them, 10/10.”
“Martin and his team do a great job and are a pleasure to work with in our new and exciting venture at OakVilla Restaurant and Distillery.”
“We phoned up as we were worried about our light switch and alarm system wiring. They sent out Jack the next day for a free look at the issue. He came adhering to full COVID guidelines I.e mask and social distanced etc… He quickly tested the issue we had and identified the issue quickly. We are so pleased with the fast, professional and friendly service which made us feel safe.”
“A great installation job that required smart thinking and problem solving due to age of house. End product is visually extremely pleasing and engineer was clean, tidy and polite. Top work!”
“We have worked with Martin and Diamond Services for many years on projects from fixed wire testing, small office refurbishments, breakdowns to complete infrastructure projects on some of our main laboratory buildings, and have always been very pleased with the professional and speedy service they provide.”
“We purchased an office building in need of renovation, and Diamond Services helped us to get our building back to a safe standard in no time all. We used Diamond Services once again when we came to extend our office space and will be using them again in our future projects.”
“Diamond Services provided a professional, efficient, and polite service. From Martin who provided the quote and guidance to the electricians undertaking the install, this gave us the confidence that we had chosen a truly professional and efficient electrical contractor who we would not hesitate to use again.”
“I have been working with Diamond Services to manage a small portfolio of properties in the Norwich area and can not recommend them highly enough. They always offer a professional, high quality and timely service. Looking forward to working with them regularly in the future.”
” We have worked with Iain and Diamond Services over a number of years and have always found them to be very efficient, effective, reliable, easy to deal with and good value for money. Highly recommended.”
View more client feedback